DataPacts

Engineering and Architecture Firms Licensing Data to AI

Checked

At a glance

An engineering or architecture firm can license project records it owns to AI companies, such as specifications, reports and project administration files, but client contracts, confidentiality duties and restricted projects decide how much of its archive it can actually deliver.

Independent reference. Every buyer is covered on the same terms, every figure carries its source and check date, and no buyer pays to be listed or placed higher.

Request an independent introduction

Tell us what data your company holds. We reply with the buyers that fit and what their terms leave out. Your details reach a buyer only after you agree to a named introduction.

IndependentYour details stay with us until you agreeNot selling is a valid outcome

Mercor's Construction Company listing names "architecture and engineering firms" among its industries (feed read 2026-11-16), and Handshake AI names "Hardware & engineering" among 11 industries (checked 2026-11-09).

Six program pages name these firms or their records, listed alphabetically and never by fee, each figure being the stating party's claim with its check date. Not licensing is a valid outcome, and engineering and architecture archives are one sector of AI training data licensing.

The DataPacts Editorial Team checked the buyer pages, statutes and rules cited here on 2026-11-09 and 2026-11-16, following how we source, date and check every figure.

What an Engineering or Architecture Firm Holds Beyond Its Drawings

An engineering or architecture firm holds five record families that AI buyers name, and only the first is the design file itself. The table compares them as of 2026-11-16, with the party that names each family, its check date and the first limit that applies.

Record family Typical contents Named by (stated by, checked) First limit Source
Design files and models CAD drawings, BIM and Revit models Mercor Construction "nice to have" (feed read 2026-11-16); Labelbox Prism CAD (2026-11-16); AfterQuery CAD designs (2026-11-09) client contract and ownership Mercor feed /construction; prism.labelbox.com; afterquery.com
Specifications and design documentation specifications, design documentation Handshake AI (2026-11-09); SuperAnnotate specifications (2026-11-09) client confidentiality joinhandshake.com/ai/data-partnerships; superannotate.com/data-partnerships
Test, inspection and closeout records test reports; inspection and closeout records; inspection reports, punch lists, correction letters Handshake AI test reports (2026-11-09); Mercor Construction "included" and "nice to have" (feed read 2026-11-16); SuperAnnotate inspection reports (2026-11-09) people and client names in reports as above
Project administration RFIs, submittals, change orders, daily logs from completed projects Mercor Construction requirements (2026-11-09) shared with contractors and owners on the same project Mercor feed /construction
Project history and presentations project history, presentations Handshake AI (2026-11-09) client names and unbuilt schemes joinhandshake.com/ai/data-partnerships

Mercor lists project documents, site imagery, and inspection and closeout records as included, with BIM and Revit models, schedules and estimates as nice to have (feed read 2026-11-16).

Native-format and file-type questions live on the CAD page, so the table does not repeat them. Formats, acquirers and stated ranges are set out under CAD and engineering files as AI training data.

Buyer Programs That Name Engineering and Architecture Firms

Seven program pages bear on engineering and architecture firms: six name these firms, their industry or records they keep, Mercor's program page leaves them out, and only Mercor's Construction Company listing names architecture and engineering firms by that name.

The table compares them as of 2026-11-16 in alphabetical order, each value being the party's own statement. B marks a buyer or licensee program and M a program that licenses onward to buyers the seller approves.

Program Role What it names for engineering or architecture firms Threshold stated Range stated (claim) Source
AfterQuery Data Partnerships B "codebases, financial models and CAD designs" among business data already processed (2026-11-09) several teams, systems and years none published afterquery.com/data-partnerships; launch post afterquery.com/blog
Handshake AI Data Partnerships B "Hardware & engineering" among 11 industries; design documentation, specifications, test reports; project history and presentations; AutoCAD among sources (2026-11-09) no minimum on the Data Partnerships page; 20+ full-time employees and 3+ years on the license and referral pages "Earn $100K to $4M+"; same-page estimator "up to $100,000" (2026-11-09; estimator re-checked 2026-11-16) joinhandshake.com/ai/data-partnerships
Labelbox Prism B CAD among the systems named (2026-11-16) no size rule stated "typically start around $50K"; "can reach $1M+" (2026-11-09) prism.labelbox.com
Mercor Construction Company listing B industries include "architecture and engineering firms"; completed-project drawings, specs, RFIs, submittals, change orders, daily logs; nice to have BIM and Revit models (2026-11-09; feed read 2026-11-16) 50 to 2,000 employees USD 115,000 to 1,000,000, "Depends on project count and imagery" (2026-11-09) api.data.mercor.com listings /construction
Mercor Hardware Engineering Company listing B native multi-part CAD assemblies with feature trees; designs the company owns, not customer IP (2026-11-09) 20 to 2,000 employees USD 45,000 to 1,350,000, "Depends on assembly count and completeness" (2026-11-09) api.data.mercor.com listings /hardware
Mercor program page B eight target industries; engineering and architecture not named (2026-11-09) not stated not stated mercor.com/data
SuperAnnotate Data Partnerships M inspection reports, equipment logs, specifications; "Any size, any industry, anywhere" (2026-11-09; FAQ 2026-11-16) none indicative "$100K – $1M+" (2026-11-09) superannotate.com/data-partnerships

Each figure is a claim, not an offer, and a program missing here may still accept engineering or architecture firms.

Demand is stated here only where a buyer's own page says so. Mercor's program page names eight target industries (legal, healthcare, finance and insurance, professional services, manufacturing, retail and e-commerce, real estate and logistics) without engineering or architecture, while its Construction listing names "architecture and engineering firms" (feed read 2026-11-16).

Mercor does not define professional services, so it is not read as covering these firms.

A firm whose archive is mainly closed-out building projects matches the Construction listing, which also names Revit and AutoCAD among its tools (checked 2026-11-09). The contractor side of the same projects is covered under construction and trades companies licensing data.

A product-engineering firm with native multi-part assemblies matches the Hardware Engineering listing, which names Altium and KiCad among its tools and excludes designs owned by customers (checked 2026-11-09).

Client Projects and the Limits on a Firm's Own Archive

A firm's archive is mostly work done for clients, so the client contract and any confidentiality duty decide what can leave the firm, before any copyright question. Mercor's Hardware Engineering listing names "Designs owned by your customers" as not a fit (checked 2026-11-09).

In the United States, 17 U.S.C. 201(b) makes the employer or the person for whom a work was prepared its author for a work made for hire, unless a signed written instrument says otherwise.

Under section 101, an employee's work within the scope of employment qualifies, while a commissioned work qualifies only in nine listed categories with a signed written agreement.

In the United Kingdom, CDPA 1988 s.11(2) makes the employer first owner of a work made by an employee in the course of employment, subject to any agreement to the contrary.

What the client contract says about drawings, models and reports is the deciding layer, and the standard clauses are not summarized on this page. Consultants' and client-supplied sheets inside a drawing set are checked separately, and a rights audit records who prepared each document.

Trade secrets add a second duty. Under the Defend Trade Secrets Act (in force 2016-05-11), 18 U.S.C. 1839(5) counts disclosure by someone who acquired a secret under a duty to maintain secrecy as misappropriation.

Directive (EU) 2016/943 Art. 4(4) makes use or disclosure unlawful where the person knew or ought to have known the secret came from someone acting unlawfully (transposition deadline 2018-06-09).

SI 2018/597 reg. 2 (in force 2018-06-09) defines a UK trade secret as information that is secret, has commercial value because it is secret and has been subject to reasonable steps to keep it secret.

Four checks come before any record is offered:

  1. Who prepared each document.
  2. What the client contract grants.
  3. What the confidentiality clause covers.
  4. Whether the project is restricted.

Professional licensure duties on client confidentiality and seal use are not covered on this page. For the contract side, see how to read customer consent and confidentiality clauses.

Defense, Energy and Other Restricted Projects in an Engineering Archive

Some project files cannot go to a buyer at all without government authorization: drawings for defense articles, controlled dual-use technology and critical energy infrastructure designs. Three rules mark them:

  • ITAR, 22 CFR 120.33(a)(1): technical data includes blueprints, drawings, plans and documentation required for defense articles, and 120.50(a)(2) treats releasing it to a foreign person in the United States as an export.
  • EAR, 15 CFR 734.13(b): a deemed export goes to the foreign person's most recent country of citizenship or permanent residency.
  • CEII, 18 CFR 388.113(c)(2): specific engineering, vulnerability or detailed design information about critical infrastructure that could help plan an attack, exempt from FOIA.

The encryption carve-outs in 22 CFR 120.54(a)(5) and 15 CFR 734.18(a)(5) cover end-to-end encrypted sending or storing of unclassified technical data, not its release to a buyer's staff. micro1's master terms s.5.7 exclude export-controlled information unless the Order Form allows it (last updated 2026-11-12, read 2026-11-16).

A firm separates these projects first, as restricted projects belong with company data that cannot be licensed.

Benefits, Risks, Downsides and Alternatives for an Engineering or Architecture Firm

Licensing can earn income from closed projects a firm already archives, but client confidentiality, restricted projects and licenses that cannot be withdrawn carry risks a fee does not offset, and not licensing is a valid outcome.

Benefits:

  • The records are already kept for the firm's own purposes.
  • Five programs name these records (AfterQuery, Handshake AI, Labelbox Prism, Mercor and SuperAnnotate), each as a claim and not an offer.
  • A nonexclusive grant leaves the firm free to keep using its records: micro1's master terms s.1.2 are nonexclusive (last updated 2026-11-12, read 2026-11-16), and SuperAnnotate states that the firm licenses rights for a set period and does not sell the data (checked 2026-11-09).

Risks:

  • Disclosure of client secrets can be misappropriation under the rules above.
  • Release of restricted technical data to a foreign person is an export.
  • A security incident at a buyer exposes what was delivered: the California Attorney General's report gives Mercor breach dates of 2026-03-24 and 2026-03-30, and In re Mercor.io Corporation Data Breach Litigation (N.D. Cal. Lead Case No. 3:26-cv-02821-WHO) is stayed pending mediation by stipulation (Dkt. 44, 2026-07-21) as of 2026-11-09.
  • micro1's grant is irrevocable and perpetual, with deletion at the earlier of 120 days after delivery completes or termination and no duty to delete or retrain Licensee Materials (s.1.2 and s.4.4, last updated 2026-11-12, read 2026-11-16).

Downsides:

  • Models already trained cannot be unlearned, per Labelbox Prism (checked 2026-11-09).
  • Labelbox Prism states that partnerships are exclusive by default, while the seller keeps ownership and continued use, which limits licensing the same records elsewhere (checked 2026-11-09).
  • Contract review across many clients takes time.

Alternatives:

Where Engineering Firm Licensing Meets Construction, Product Hardware and the Seller Path

Engineering and architecture firms share project records with contractors and design files with product companies, and the industry index sets out what limits each sector. Engineering and architecture is one sector in data licensing by industry, and production drawings sit with manufacturers licensing industrial data.

Product design belongs to hardware and product engineering companies, process data to semiconductor companies, grid designs to energy and utility companies and client deliverables to consulting firms.

The federal rule under the Defend Trade Secrets Act and licensed training data sits beside trade secrets and confidential information and export controls on technical data.

Names, stamps and client details in reports go through de-identification before licensing, and archives inherited in a merger follow the rules for data from acquired companies. Project software terms are set out for Deltek, Autodesk and Newforma and Procore, and site capture for drone imagery.

The seller steps follow the general process:

  1. Check data sale readiness.
  2. Build the data inventory for an AI data sale, project by project.
  3. Sign NDAs before sharing data or a sample.
  4. Read choosing a buyer for your data.
  5. Negotiate the clauses of AI data licensing agreements.

This page is information, not legal advice.

Buyer and Program Pages Named on This Page

Each program above has its own page with dates and sources.

Frequently Asked Questions

Can an architecture firm license its drawings for AI training?

Yes, for drawings the firm owns and no client contract, confidentiality duty or export rule restricts. Mercor's Construction listing names architecture and engineering firms and asks for drawings and specs from completed projects (feed read 2026-11-16).

How much do AI companies pay engineering firms for data?

No engineering-firm price paid is on record. Mercor states USD 115,000 to 1,000,000 per company for its Construction listing, depending on project count and imagery (checked 2026-11-09). The wider picture is in what company data is worth to AI companies.

Do AI buyers want BIM and Revit models?

Mercor lists BIM and Revit models as a nice to have on its Construction listing and names Revit and AutoCAD among its tools. Handshake AI names AutoCAD among its sources (checked 2026-11-09).

Can engineers and architects get paid to train AI?

Individual professionals can do paid expert tasks for human-data platforms, a separate route from licensing the firm's records. No figures are given here. That work is covered under expert contributor work by field.