Autodesk's Forma Data Connector and Files API are the only export routes documented on public pages that were readable.
Deltek's public pages do not publish customer terms. Each of these systems is a source system in AI training data licensing, and none of the three vendors' documents grants a buyer anything. Autodesk products appear on two Mercor listings, and no program on record names Deltek or Newforma.
DataPacts Editorial Team: how we source, date and check every figure. The vendor pages, the statute text and the Mercor listings were read in November 2026, and each date is shown beside its claim.
What These Three Systems Hold and What a License Can Cover
Deltek, Autodesk and Newforma hold different layers of an engineering or architecture firm's record: Deltek's project accounting and ERP products, Autodesk's design and construction collaboration platform, and Newforma's project information management.
Deltek's site names Vantagepoint, Costpoint, Maconomy and Ajera. Autodesk Forma is, in Autodesk's words on construction.autodesk.com (read November 18, 2026), "formerly Autodesk Construction Cloud". Newforma's site names Project Center and Konekt.
A license can cover only what the firm controls. Vault is named in this page's scope, but no Autodesk document read describes it, so no Vault term is stated.
Limits that apply to a firm as a whole sit on the page for engineering and architecture firms licensing data to AI. This page covers the vendors' terms and the export routes.
Who Controls the Data These Systems Hold
Three layers shape what a firm can license from these systems: each vendor's own terms on customer content, the client contracts and copyright behind the files, and the people named in the records.
Autodesk General Terms: Ownership, Use and Retrieval
Autodesk's General Terms, last updated November 11, 2026, state in Section 5, "You Own Your Work", that the customer retains its ownership rights to files, designs, models, data sets, images, documents or similar material it creates and uploads.
Ownership of that kind is the starting point of the rights audit of the data to be licensed. Section 18 defines Your Content as those uploads and "Your specific output generated from the use of any Offering based on Your own raw data or information".
Section 8.5 says Autodesk personnel will not use Your Content except at the customer's request or with its consent, in connection with providing and improving Offerings, or in connection with legal obligations, enforcement, investigations or proceedings.
The same section has the customer authorize Autodesk to "use, reproduce, modify, distribute and make available" Your Content in connection with providing Offerings. Section 13 gives Autodesk ownership of Metrics, defined as usage data "(but not Your Content itself)". Section 17.6 bars uploading classified information or content subject to the International Traffic in Arms Regulations.
"Providing and improving Offerings" sits beside the no-prior-grant warranty a buyer may ask for, and whether the two conflict is a question for the buyer and counsel.
Autodesk and AI: What the Terms Do Not State
The Autodesk General Terms read on November 18, 2026 contain no wording on artificial intelligence, machine learning, generative features or model training.
Autodesk's AI and Trust Center pages could not be read, so whether Autodesk trains any model on Your Content, and whether an opt-out exists, is not stated in the documents read. Vendor training across platforms is covered on a separate page.
Deltek: Unpublished Customer Terms and the Dela AI Page
Deltek's public legal index, read on November 18, 2026, lists a Privacy Policy, Cookie Policy, Data Privacy Framework Policy and Transparency Statement, and no customer terms. The Privacy Policy, effective July 15, 2026, refers to "our Deltek General Terms or other similarly applicable agreement" without a URL, and the terms were not found.
The policy does not apply to personal information collected "in the context of our customer relationships such as when we provide services to our customers or when end-users enter data into Deltek products", which is "addressed under separate agreements with our customers".
Deltek's Dela page (undated, read November 18, 2026) says customers "have the choice to opt into the AI-powered features" and "We're committed to working with GenAI partners who respect customer privacy and cannot use customer data to train large language models (LLMs)".
That sentence concerns GenAI partners and LLMs. Deltek's own use of customer data, and any terms on it, are not stated in the pages read.
Newforma: The Privacy Notice and Model Training
Newforma's Privacy Notice, effective October 5, 2026, states that Newforma does not use customer content to train or retrain AI models, or permit its AI providers to do so, unless the customer has expressly authorized that use in writing under the applicable agreement.
When processing on behalf of customers through its products, Newforma "generally acts as a data processor, service provider, or equivalent role", and customer content is "Information uploaded or processed within Newforma products".
AI processing for a customer follows "that customer's documented instructions and the applicable customer agreement", and the notice "does not expand our contractual rights to use customer information". The customer agreement and its AI terms are not published on the pages read.
How Data Leaves These Systems
Of the three vendors, only Autodesk documents an export route in a public page that was readable: the Forma Data Connector API and the Files API. The table compares the routes as of November 18, 2026.
| Vendor | Documented route | What the record shows | Source |
|---|---|---|---|
| Autodesk (Forma) | Data Connector API | Scheduled extracts of Admin, Issues, Locations, Submittals, Cost and RFIs as CSV files and a ZIP with README; signed URL valid 60 seconds; project administrator or executive overview permission | aps.autodesk.com, read 2026-11-18 |
| Autodesk (Forma) | Files API | Upload, access and share 2D plans, 3D BIM models and other documents | aps.autodesk.com, read 2026-11-18 |
| Deltek | none read | Not stated | deltek.com pages read 2026-11-18 |
| Newforma | none read | Not stated | newforma.com pages read 2026-11-18 |
Autodesk Forma: Data Connector and Files API
The Forma Data Connector API extracts data from Admin, Issues, Locations, Submittals, Cost and RFIs across the projects of a hub, once or on a daily, weekly, monthly or yearly schedule.
An extract is a set of CSV files, with a ZIP of all files and a README that lists the schemas, and the signed URL is valid for 60 seconds.
It requires project administrator or executive overview permission, and requests are rate limited. The Files API "lets you upload, access, and share 2D plans, 3D BIM models, and other project documents" and is part of the Data Management API.
Data Connector returns project data tables, not drawings or models, so a complete model archive needs the Files API or another route that the pages read do not state. Programs that read data in place rather than take an export are covered under buyer connectors vs native exports.
Deltek and Newforma: What No Public Page Documents
No public page read for Deltek or Newforma documents how a customer exports its data, so this page records the export routes as not stated. Deltek's product documentation was not read, so a firm reads its own vendor documentation before planning an export.
Drawings and Models in an Export: Copyright and Client Contracts
An export of drawings and models carries whatever copyright and contract limits the files had inside the system, because none of the three vendors' terms transfers or settles them.
Under 17 U.S.C. 102(a), copyright subsists in original works of authorship fixed in a tangible medium, including "(5) pictorial, graphic, and sculptural works" and "(8) architectural works", and section 102(b) gives no protection to "any idea, procedure, process, system, method of operation, concept, principle, or discovery" (read November 18, 2026). Whether a given CAD or BIM file is protected is not decided here.
Ownership by staff, contractors and clients, and the CAD software terms, sit on the page for CAD and engineering files as AI training data, and the firm-level client-project limit sits on the industry page.
What a client contract says decides before any copyright question, and standard design-contract ownership clauses are not described here. Mercor's Hardware Engineering Company listing lists "Designs owned by your customers" as not a fit.
What Programs Name When They Ask for These Tools
Two Mercor listings name an Autodesk product, and no program on record names Deltek or Newforma. The table shows what each listing states, as of November 9, 2026, and Mercor's statements are its own.
| Program | Role | Tool named | What the listing asks for | Source |
|---|---|---|---|---|
| Mercor Construction Company listing | Program | Autodesk Construction Cloud, with Revit and AutoCAD | Completed-project drawings, specs, RFIs, submittals, change orders, daily logs; site imagery; 50+ employees; asks "Do any owner contracts restrict project data?" | api.data.mercor.com listings, construction |
| Mercor Hardware Engineering Company listing | Program | Autodesk Fusion | Native CAD assemblies; "Designs the company owns, not customer IP"; not a fit: "Designs owned by your customers" | api.data.mercor.com listings, hardware |
The AI data partnership payouts and program terms compared page sets them side by side.
Licensing Engineering and Architecture Project Data: Benefits, Risks, Downsides and Alternatives
Licensing project data held in these systems is a choice with benefits and risks, and not licensing is an equally valid result.
Benefits
- An archive that the vendor's terms keep only for a limited retrieval window after a subscription ends can be preserved under the firm's own contract.
- The firm sets the scope through its own license contract.
Risks
- Client contracts and copyright held by others can bar the use, so the customer consent and confidentiality clauses come first.
- Personal data of staff and project parties sits in timesheets, RFIs and drawings.
- Content subject to the International Traffic in Arms Regulations cannot be uploaded to Autodesk under Section 17.6, and export-controlled material needs separate handling.
Downsides
- Preparation takes effort: rights review and removal of personal data.
- No Deltek or Newforma export route is documented on the pages read.
- The retrieval window after Autodesk cloud services end is described as brief.
Alternatives
- Do not license at all.
- License only a subset the firm itself authored.
- Keep the archive in the firm's own storage.
Deltek, Autodesk and Newforma Among the Industry Systems and the Seller Steps
These three systems sit with the other industry systems whose terms decide what a company can license, such as Procore, ServiceTitan and ConnectWise. The parent page, export rights and mechanics by source system, compares the systems side by side.
Sibling pages cover Procore project records, ServiceTitan field-service data and ConnectWise MSP ticket data, and the industry pages cover construction and trades companies licensing data to AI and hardware and product engineering companies licensing CAD and test data. The seller steps run in this order:
- Data inventory
- Customer consent and confidentiality clauses
- Employee notice and consent
- Data manifest
- Delivering licensed data to an AI buyer
- Should you sell or license your data
Autodesk Data After Account Closure
Autodesk may provide a brief period, for example 30 days, to retrieve Your Content after a cloud subscription ends, and otherwise may delete it without notice (General Terms, Section 16.3, last updated November 11, 2026).
Section 16.2 lets Autodesk terminate if the customer becomes insolvent, and the terms terminate automatically if the customer goes into liquidation. Other vendors' closure terms are not stated. This page is information, not legal advice.
- Dated vendor deadlines are on the page for deadlines for exporting company data before shutting down.
- A shut-down firm's options are on the page for selling data from a defunct company.
Buyer Programs Cited on This Page
This page cites one program, Mercor.
Frequently Asked Questions
Does Autodesk own the files a firm stores in Forma or Vault?
Section 5 of the General Terms says the customer retains ownership of what it uploads. Section 8.5 lets Autodesk use Your Content to provide and improve Offerings. Vault terms were not read.
Does Newforma use customer content to train AI?
Newforma's Privacy Notice, effective October 5, 2026, says it does not, unless the customer has expressly authorized that use in writing. The customer agreement was not read.
Does Deltek use customer data to train AI?
Deltek's Dela page says GenAI partners cannot use customer data to train LLMs, but Deltek's own use is not stated. Vendor training is covered under user data and platform terms.
Can an engineering or architecture firm license its project data to AI companies?
Only what the firm controls, and client contracts and copyright come first. See what company data cannot be licensed.